Follow

Why is the blue power status light on the printer flashing?

If the power status light is flashing slowly (once per second), this indicates that the inserted label cartridge is not loaded properly in the printer or is out of labels.
  • Check to make sure that the label cartridge is not out of labels.
  • Check to make sure labels are visible on the underside of the folding label guide. If necessary, gently pull the labels with your thumb until they reach the halfway point of the slot on the underside of the folding label guide.
  • Load a new label cartridge.

    If the power status light is flashing quickly (twice per second) and the wireless status light is off, this indicates that the printer is in self-test mode. Disconnect the printer from all power sources and then reconnect the power.
Was this article helpful?
1 out of 4 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk